porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands
porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands
porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands
porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands
porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands
porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands

porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands

Item code #:sku-YdiGD%
$CAD 1159.890$CAD 1280.430

275 in stock.

QTY:

What is porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands?
      The most award-winning porn body massage Mesh WiFi system on the planet: porn body massage PC Mag, porn body massage CNET, Wirecutter, Forbes, porn body massage SmallNetBuilderMaintains speed even as more devices use your WiFi at the porn body massage same time, thanks to patented porn body massage tri-band technologyEliminates WiFi porn body massage dead zones and buffering - 5,000 square feet of consistent coverage - porn body massage with speeds up to 3GbpsNETGEAR Smart Parental Controls porn body massage promotes healthy Internet habits, fosters responsibility and porn body massage builds trust porn body massage with your kids (30-day porn body massage free trial porn body massage included)Ultra-performance porn body massage Mesh WiFi network blankets every inch of your home in super fast and seamless WiFi porn body massage connectivity - room to porn body massage room, porn body massage wall to porn body massage wall, porn body massage floor porn body massage to floorNETGEAR Armor protects your family's WiFi with an automatic porn body massage shield of security across all your connected porn body massage devices with a 30-day free trialMy last few routers have all been Asus porn body massage routers, I tend to by porn body massage the biggest one I can get to get coverage porn body massage in all areas of my home. My old Asus RT-AC87U router is porn body massage located in my man porn body massage cave which is porn body massage in the basement of porn body massage my ranch porn body massage house and all porn body massage the way porn body massage at one end of the house. Because of this placement it porn body massage makes getting porn body massage a good strong porn body massage signal porn body massage upstairs and at the other porn body massage end of porn body massage the house porn body massage a little difficult. porn body massage Ive tried various methods to extend the wifi in the porn body massage past including using power line adapters and wifi porn body massage repeaters, theyve always been porn body massage a little porn body massage flaky so I always try and just buy a porn body massage big router instead.Ive seen the porn body massage mesh wifi routers becoming porn body massage more popular, there big selling porn body massage point porn body massage is porn body massage that everything is seamless to install and configure, you dont porn body massage have to mess with setting up porn body massage multiple porn body massage routers in porn body massage bridge porn body massage mode or anything else, you porn body massage just plug them in and they all work together to form a big wifi mesh network. I started looking at the porn body massage 2 that had been out for a while, Eero and Luma and they seemed fairly decent porn body massage but porn body massage had porn body massage mixed reviews. Then I saw that NetGear had come out porn body massage with porn body massage their own, the Orbi. I had intended to just porn body massage upgrade to another big honkin router, porn body massage the Nighthawk X6 AC3200 porn body massage but the Orbi caught porn body massage my eye porn body massage and was getting very good reviews porn body massage so I thought I would give porn body massage it a try instead.One thing that stood out with the porn body massage Orbi is its porn body massage dedicated backhaul, porn body massage which is the connection porn body massage between the main porn body massage router and the satellite routers, other porn body massage mesh porn body massage wifi systems use the same radios porn body massage that is used for porn body massage user porn body massage traffic porn body massage for porn body massage the connections between devices as porn body massage well. The porn body massage Orbi has a dedicated radio porn body massage for porn body massage that to separate that traffic and not use up user bandwidth which allows porn body massage for better performance. porn body massage So porn body massage after reading up on porn body massage everything I porn body massage could find porn body massage about the Orbi and seeing good things I ordered the 2 porn body massage unit porn body massage model porn body massage (router + satellite).When it arrived porn body massage I opened it and porn body massage it was very nicely packaged, the router and satellite units are the same size and fairly big (also a bit slippery). porn body massage I followed porn body massage the quick install instructions, removed my old router, unplugged my porn body massage cable modem, porn body massage plugged porn body massage it back in, porn body massage turned on the main porn body massage Orbi router, plugged porn body massage it into the cable modem, placed the satellite upstairs and porn body massage plugged in the power and finally porn body massage plugged my desktop PC into porn body massage the wired Ethernet port on porn body massage the porn body massage main Orbi router. On the Satellite unit, when porn body massage I plugged porn body massage it porn body massage in porn body massage it was supposed porn body massage to porn body massage glow amber porn body massage and then change to blue once porn body massage it connected porn body massage to the main Orbi router, no luck there, it just kept flashing white porn body massage despite porn body massage it porn body massage being porn body massage only about 15-20 feet away from it. I porn body massage gave up on that and went back porn body massage to getting the main router configured.I porn body massage then went porn body massage to http://orbilogin.com and porn body massage thats when my problems started. The first thing it does is check for an internet connection, it kept timing out saying it couldnt porn body massage connect to the internet. porn body massage I checked the cable between porn body massage it and the cable porn body massage modem, I porn body massage turned the Orbi router on and off porn body massage and still porn body massage no luck, finally I had to power cycle the cable modem again and it worked. It went through the setup process, then asked me to porn body massage register porn body massage it, I put my serial number and info in, it said it would send me a confirmation email porn body massage and waited for porn body massage me porn body massage to acknowledge that email before it could porn body massage proceed. porn body massage I never porn body massage got the porn body massage email so I just closed the window and went back to porn body massage the main Orbi porn body massage admin porn body massage page.Both the satellite and main router porn body massage had pretty old firmware versions porn body massage so porn body massage I went to the firmware update porn body massage page, porn body massage it detected new porn body massage firmware for porn body massage the router porn body massage but was stuck on Please wait while checking for porn body massage new firmware on the satellite, because of this the update buttons wouldnt work either. I porn body massage waited porn body massage about porn body massage 10 minutes and it was still stuck, I tried again and the same porn body massage thing happened, finally I gave up and called Netgears support.Trying porn body massage to navigate to NetGears support was another fun challenge, they seem porn body massage to hide any way to contact phone support on their main website. porn body massage They also want you to take porn body massage a picture porn body massage of porn body massage your receipt porn body massage that you bought porn body massage the unit to get to support. I porn body massage wasnt porn body massage having any of that, I was already getting fed up that this supposedly super easy porn body massage Orbi was already giving me problems. I finally googled Netgear support phone number and found the number porn body massage to porn body massage call them.The porn body massage first guy I porn body massage talked porn body massage to was your typical, read from a script, porn body massage I porn body massage know very little type of support porn body massage guy, I knew I porn body massage wasnt going to get anywhere fast with him. He kept porn body massage making useless suggestions and porn body massage asking non-relevant porn body massage questions, he also wanted me porn body massage to porn body massage move the satellite closer porn body massage to the router. I porn body massage told him I wasnt going to porn body massage do that, if porn body massage those 2 units cant communicate well enough from 15-20 feet away moving them closer wasnt going to do anything. Finally I got porn body massage fed up and asked to talk to a supervisor.The porn body massage supervisor didnt seem any more skilled then porn body massage the first guy, porn body massage he porn body massage said he could have someone porn body massage from advanced porn body massage support call me porn body massage back, I finally was about to hang porn body massage up and told him to porn body massage forget it Im porn body massage just going to porn body massage return this. This porn body massage got me an porn body massage immediate Ill transfer you to porn body massage someone who actually porn body massage knows what they are talking about response. In porn body massage a few minutes I porn body massage was talking porn body massage to their advanced support who porn body massage did a remote session to my desktop.They porn body massage went through porn body massage the process of downloading and manually updating porn body massage the porn body massage satellite firmware. porn body massage Apparently porn body massage there is porn body massage a bug in the earlier firmware version where porn body massage you porn body massage cant porn body massage automatically update firmware through the admin porn body massage console. Once porn body massage that was porn body massage manually applied the satellite unit re-started and then it looked like the main router porn body massage unit updated its porn body massage firmware automatically and re-started as well. porn body massage From that point they were both at the latest firmware porn body massage versions and everything was porn body massage working. You can porn body massage only make a porn body massage first impression once porn body massage and with the porn body massage issues I porn body massage experienced while setting Orbi up porn body massage my initial excitement at getting a new wireless router quickly turned to porn body massage frustration and aggravation.I checked my porn body massage signal strength upstairs and porn body massage at porn body massage the opposite side of the house (see above) and it was very strong, much porn body massage stronger then with the porn body massage single porn body massage Asus porn body massage router. Also note that I pretty much get 5Ghz porn body massage coverage anywhere in the house now both porn body massage upstairs porn body massage and porn body massage downstairs where I only was able to get it downstairs porn body massage in porn body massage the man cave and just outside porn body massage before.So porn body massage after an hour porn body massage or so of aggravation everything was porn body massage finally working. porn body massage Im only on my first day with porn body massage the Orbi, it seems to be porn body massage working well porn body massage now but only time porn body massage will tell. The hardware seems porn body massage solid, the admin UI seems laggy and is porn body massage a porn body massage bit plain porn body massage and basic but it has a fairly decent amount of porn body massage advanced networking features. There is also no cloud management connection required like some of the porn body massage other mesh systems require were if you lose internet connectivity your porn body massage whole LAN is down as well. porn body massage The Orbi does have 3 porn body massage wired Ethernet ports porn body massage which is a big porn body massage plus, I porn body massage do have a NetGear 24-port smart switch that I use porn body massage for a home lab but its nice porn body massage to not have to use that if needed.One thing I had wanted to know porn body massage was porn body massage the status of the porn body massage backhaul connection between the router and the satellite porn body massage to see if they were optimally positioned. The Orbi admin UI just simply porn body massage says 1 Satellite connected but tells you nothing about the status and strength of that porn body massage connection. porn body massage The porn body massage LED porn body massage ring on top of the satellite only works when you porn body massage initially plug it in porn body massage and then porn body massage goes porn body massage dark. Id like to know that the satellite is porn body massage working and porn body massage how porn body massage well its working, it would porn body massage be nice if that LED ring would stay on porn body massage or could be turned porn body massage on if desired to porn body massage tell you how the satellite is doing. I also hate porn body massage looking at porn body massage the main porn body massage router and having no visible porn body massage indication of what the hell its doing, it could porn body massage be off for all I porn body massage know. NetGear put that porn body massage LED to work and make it configurable in the porn body massage admin UI. porn body massage How about different porn body massage colors for certain states and porn body massage pulsing speed based on how busy it is. porn body massage It would also be nice porn body massage if the admin porn body massage UI could show you more detail on the router-satellite porn body massage connection.There are really two big components to a porn body massage wireless router, its hardware and its software, you need the combination of both of porn body massage these to be good porn body massage to have a porn body massage great product. I wont dispute porn body massage NetGear has always had great hardware and that looks to still be the case with the Orbi, porn body massage but porn body massage quite frankly there porn body massage software porn body massage has always porn body massage been pretty crappy. My past few routers have been Asus and porn body massage if its one thing that Asus porn body massage has nailed porn body massage its porn body massage their software which totally kicks ass, there admin UI is feature rich, very nicely porn body massage laid out and easy to use porn body massage and they update it porn body massage constantly. You can even get the Merlin builds which porn body massage are based on the stock software porn body massage which take it to the next level. Coming from Asus, looking at NetGears UI is a big let down, its plain, basic, lacking and it looks like a 10 year porn body massage old designed it. porn body massage You also porn body massage have porn body massage to download a separate Windows NetGear Genie app to do certain things, why porn body massage cant porn body massage I do it all in porn body massage the porn body massage web based UI Also how about being able porn body massage to show porn body massage a network map porn body massage and maybe some basic device usage reporting NetGear if you would just give your admin UI an overhaul porn body massage you porn body massage would have a killer porn body massage product.Now lets talk porn body massage Parental Controls which is one area that NetGear has always sucked at which is one of porn body massage the major reasons I always chose Asus over them in porn body massage the porn body massage past. I would of thought porn body massage by porn body massage now NetGear would have been porn body massage able to figure out this important porn body massage feature to any parent and implement it correctly. porn body massage Instead they porn body massage have a half-assed & weak porn body massage Parental Controls in porn body massage their admin UI porn body massage and porn body massage then they punt porn body massage and say go use Open DNS if you want more porn body massage which would porn body massage work porn body massage great porn body massage until your kid figures out porn body massage how to change porn body massage their DNS porn body massage server. porn body massage On my Asus router, I had full Parental Controls porn body massage built-in porn body massage including the most important porn body massage one porn body massage to porn body massage me, time of porn body massage day access porn body massage control by MAC address porn body massage so I can porn body massage shut my porn body massage kids internet off at night at a specific porn body massage time. porn body massage While NetGear porn body massage has time controls porn body massage built-in porn body massage it porn body massage impacts every device connected to the router not just porn body massage specific ones. Is it really that hard NetGear porn body massage to implement time of day controls by MAC addressAll in all if I would porn body massage say Im satisfied porn body massage with the Orbi so far and will likely keep it, what any wireless router has to porn body massage do porn body massage really well is perform and that is what counts the most as you are using it porn body massage day porn body massage in and day out. Things like the admin porn body massage UI you do not frequently use porn body massage so as long as my porn body massage wifi is fast porn body massage and gives me good coverage porn body massage across my entire house Im all good. It would be nice if they improved the admin UI, porn body massage parental porn body massage controls, LED porn body massage light functionality and porn body massage other things. The porn body massage Orbi is still porn body massage pretty new so hopefully porn body massage the software improves over time which porn body massage would porn body massage make me even porn body massage happier.UPDATE porn body massage (12/11/16):After living with Orbi for a porn body massage few porn body massage days now, all I can say is: damn porn body massage this thing kicks ass. I porn body massage get awesome coverage porn body massage all throughout the house and I can get 5Ghz porn body massage anywhere. From one of the farthest points from porn body massage the main router porn body massage and satellite my iPad speed test is around 170Mbps, crazy porn body massage fast. porn body massage My PC that is wired to one of Orbis Ethernet ports does a porn body massage speed porn body massage test at 232 Mbps. Also in that same room porn body massage were I would regularly porn body massage get the porn body massage flashing wifi signal porn body massage in Clash porn body massage of Clans meaning Im about to get disconnected (CoC tends to be latency porn body massage sensitive), I have not been disconnected porn body massage once with Orbi. Im very happy with how well Orbi performs and would recommend it to porn body massage anyone looking for whole home wifi, porn body massage NetGear please just work on your admin UI and Ill be even happier!UPDATE 2 (12/13/16):NetGear yesterday released a porn body massage new Orbi firmware version (1.4.0.18) it was mostly porn body massage minor porn body massage but contained support for a new IOS/Android app porn body massage that was released porn body massage yesterday for management. My initial thoughts were, great now I porn body massage have to go porn body massage through another porn body massage painful firmware upgrade process, porn body massage and also cool porn body massage an porn body massage app that might make porn body massage device management easier. The firmware upgrade went OK porn body massage without issue this time around, I upgraded it through the admin porn body massage UI and it was pushed porn body massage out to both porn body massage the main porn body massage router and satellite. I downloaded the admin app to porn body massage my iPad porn body massage hoping porn body massage for new management goodness and when I launched it porn body massage found it to be a porn body massage bit of a joke, porn body massage you can do almost nothing in the app and its got to porn body massage be the most basic porn body massage app Ive seen looking like someone wrote it less than an hour.When porn body massage you porn body massage launch the porn body massage app porn body massage youre greeted to porn body massage their porn body massage dashboard which is nothing porn body massage more than a porn body massage screen with porn body massage a porn body massage giant picture of an Orbi with porn body massage the only porn body massage information shown being porn body massage your Wifi network and password. porn body massage If you browse porn body massage the limited menu porn body massage they have stuck in porn body massage the corner porn body massage all porn body massage you porn body massage can do is show device info (nothing more than the model, MAC address and porn body massage the firmware version only for porn body massage the porn body massage router) and connected devices and thats about it. porn body massage My porn body massage excitement porn body massage of having an iPad management app porn body massage quickly porn body massage went to this royally sucks, app deleted. Again NetGear looks to not have porn body massage a clue at designing a useful and nice porn body massage management UI/app, they are lucky their hardware is keeping porn body massage me a customer because their administration porn body massage interfaces are trying real hard porn body massage to push me away.Pluses:3 wired Ethernet portsFast and strong porn body massage wifi signalNice looking hardwareDedicated backhaul channel porn body massage between router porn body massage & porn body massage satelliteRouter is pre-paired with satellite unitNo cloud management requiredHas a decent amount porn body massage of advanced networking featuresCons:LED light rings on top are fairly uselessCrappy admin UI is fairly bland and a bit laggyNo way to see details of router-satellite connectionNo time scheduling parental porn body massage controls by MACFirmware upgrade is buggyIOS app is porn body massage terribleSupport porn body massage isnt great unless you porn body massage tell them you are returning itUPDATE 7/13/17:Despite an initial porn body massage rough start with the NetGear Orbi Home Wifi porn body massage System Ive been porn body massage a big fan of it up until today. The porn body massage reason I porn body massage bought the Orbi was because I porn body massage kept having porn body massage wifi drops in some areas of my house with porn body massage my Asus porn body massage RT-AC87U router. I play porn body massage a lot of porn body massage online games like Clash of Clans and if you know CoC the porn body massage dreaded wifi symbol while you are playing is not something porn body massage you porn body massage want to porn body massage see. That symbol means your connection sucks and you porn body massage are about porn body massage to get porn body massage dropped, I porn body massage would get that frequently with my porn body massage Asus router. Once I had Orbi up porn body massage and porn body massage running my wifi problems porn body massage were porn body massage completely gone for 7 porn body massage months, until today.Netgear pushed out a 1.12.0.18 update to porn body massage my router and satellite porn body massage last night and porn body massage today I awoke to constant and porn body massage frequent porn body massage disconnects on both my iPad Air porn body massage 2 and porn body massage Galaxy S7 porn body massage Edge. I could literally not porn body massage go a minute without a disconnect. I porn body massage called their support who was basically useless, they porn body massage said to enable porn body massage Implicit Beamforming which porn body massage has been porn body massage disabled by default porn body massage many updates ago because of issues it caused porn body massage with porn body massage some devices. porn body massage I tried porn body massage that anyway porn body massage and porn body massage it porn body massage seemed to help a little with the porn body massage iPad but porn body massage not the Galaxy porn body massage S7.Ironically Netgear porn body massage had a big focus on porn body massage fixing wifi disconnects with this update which has apparently porn body massage plagued them from the beginning, read porn body massage the Netgear forums and there are lots of threads on this porn body massage issue like this one and this one. porn body massage They also porn body massage have problems with the Orbi losing porn body massage connection to your internet porn body massage device (i.e. cable porn body massage modem), I also porn body massage experience porn body massage this frequently as porn body massage well, the porn body massage only porn body massage fix is to porn body massage reboot the cable porn body massage modem. Most of porn body massage the updates up until now have not really done all that much, this one porn body massage had a lot of big porn body massage fixes as seen below:Fixes the iOS disconnection issue.Fixes the Dropcam disconnection issue.Fixes the convergence porn body massage issue when an porn body massage Ethernet porn body massage connected device moves from one Orbi to another.Fixes porn body massage the issue where the Orbi app porn body massage cant find the Orbi router if porn body massage the router is using IPv6 and is in AP porn body massage mode.Fixes the issue where the Orbi porn body massage app porn body massage cant display porn body massage more than 20 connected porn body massage devices.Fixes the issue where the installation assistant porn body massage might porn body massage not display if the porn body massage device porn body massage is connected to the Orbi network wirelessly.Fixes the issue where the 2.4 GHz backhaul setting is disabled if porn body massage the fronthaul MU-MIMO and TxBF is disabled.Fixes the porn body massage issue porn body massage where IPv6 devices on the guest network can access the Orbi routers web GUI.Includes security fixes for the following porn body massage security vulnerabilities:PSV-2016-0133, PSV-2017-0607, PSV-2017-0615, PSV-2017-0736, porn body massage PSV-2017-2190So an update that porn body massage supposedly fixes disconnect issues (which I never experienced) does porn body massage the opposite and starts causing them porn body massage instead. Thank you porn body massage Netgear for porn body massage breaking my perfectly porn body massage wonderful wifi system. Apparently their engineering team porn body massage has been spending most of porn body massage their time introducing new porn body massage Orbi devices and not spending much time refining their current firmware.I ended up porn body massage downgrading porn body massage both my router porn body massage and satellite to the porn body massage prior version which is porn body massage 1.11.0.20 which porn body massage has been working porn body massage perfectly. porn body massage In fact porn body massage I have never had an porn body massage issue with an Orbi update until porn body massage now, Im beginning to porn body massage suspect porn body massage the porn body massage reason why is that they havent really done much with porn body massage any of their 11 porn body massage updates porn body massage up until this one. Look at their typical release notes porn body massage for the last 3 updates:1.10.1.2 C Fixed few bugs1.9.1.2 C Fixes porn body massage bugs and security issues. C Improves the firmware upgrade process. porn body massage C Continuous porn body massage improvement in porn body massage wireless porn body massage connection stability1.8.0.6 C porn body massage Fixes bugs and security issues. porn body massage C Supports Korea wireless regionNow that they have porn body massage finally starting porn body massage to pay porn body massage attention to some of the serious issues that Orbi has porn body massage had they have apparently tried porn body massage to fix some things and broke other things. porn body massage At this stage with this new update Im not going to porn body massage update past 1.11.0.20 until Netgear gets their act together which is a shame as I will be missing out porn body massage on potentially porn body massage other fixes porn body massage and enhancements. I loved my Orbi up until today and just yesterday porn body massage was recommending it to porn body massage people. However after this update dropped I will not recommend it anymore and may just end up migrating to one of the competing systems from porn body massage Ubiquiti, Google porn body massage and Eero which porn body massage is a shame as Netgear had a good thing going with porn body massage Orbi. Ultimately porn body massage it comes down porn body massage to porn body massage what works best for me and porn body massage if Orbi can no longer deliver that anymore than its porn body massage adios amigo.I'm going porn body massage to porn body massage keep this short, because porn body massage otherwise I'll end porn body massage up deleting this porn body massage after several revisions and give up. For this I porn body massage product line (Orbi RK50), porn body massage this will be my porn body massage third attempt, because I feel rather strongly about it. Also, you may find porn body massage this review porn body massage somewhat strange, because I will spend porn body massage most of the time not porn body massage talking about it. If you have porn body massage the time and porn body massage patience, please bear with me porn body massage - I promise porn body massage there's porn body massage a porn body massage point to it. porn body massage Finally, I porn body massage apologize in advance if this review contributes porn body massage toward porn body massage you porn body massage deciding porn body massage to buy this wifi distribution porn body massage system and it turns porn body massage out not to meet your needs. There are always edge cases where even the best products will underperform. Wireless data transmission, unlike wired, is strongly affected porn body massage by a number porn body massage of porn body massage external factors, such as porn body massage obstacles porn body massage (e.g. material type and thickness), porn body massage competing signals (vicinity and porn body massage number) that cause interference porn body massage and result porn body massage in porn body massage diminished porn body massage performance.In porn body massage my case, there are only a small number of porn body massage other signals in the neighborhood; but due to the porn body massage position of the cable modem providing internet porn body massage service - which is porn body massage situated porn body massage on the second floor, porn body massage in a far corner porn body massage - there were porn body massage many dead zones throughout the house. The built in wifi transceiver of the porn body massage modem (a typical FIOS unit) provided porn body massage relatively porn body massage adequate porn body massage service on porn body massage that floor; porn body massage but on the porn body massage first floor, porn body massage the signal porn body massage was porn body massage significantly diminished and porn body massage entirely inadequate for reliably porn body massage streaming porn body massage video to the television that sits at the opposite end of porn body massage the house. In addition, there is an porn body massage adjunct structure that was added later and connects on the opposite end first porn body massage floor porn body massage via a thick porn body massage door. Beyond this point, porn body massage the signal was very faint and could only porn body massage be picked up porn body massage sporadically, porn body massage near the door. Suffice it to say, the entire basement was porn body massage a porn body massage dead zone and areas in between varied from acceptable (first floor, closest to the modem) to mostly inadequate.(note: if you porn body massage are porn body massage unfamiliar with some of the terminology in this section, don't let it confuse you. I'm porn body massage providing the additional porn body massage information porn body massage mainly to porn body massage clarify the porn body massage effort I put porn body massage into porn body massage solving the problem.) My first attempt was to porn body massage simply reuse porn body massage existing hardware: a 3 porn body massage year old 1900AC router with dual frequency antennas and a porn body massage Tinkerboard with an AC-56 porn body massage dual radio USB dongle porn body massage attached. I porn body massage tried porn body massage using both devices porn body massage mentioned (the former running various porn body massage releases of OpenWRT and the latter running a flavor of Debian porn body massage Linux with porn body massage hostapd etc. porn body massage configured). I used porn body massage the 'iw porn body massage phy info' command porn body massage in porn body massage both cases to find device specific info for porn body massage tunable parameters, to ensure that both configurations porn body massage were optimally supporting underlying device capabilities (set via hostapd.conf in Linux and wireless config file in OpenWRT). porn body massage For the porn body massage AC-56 I also porn body massage compiled a third porn body massage party variant of the porn body massage RT8812AU kernel driver, which reduces some porn body massage hardware restrictions (mainly usability of side channel transmission porn body massage in a porn body massage competitive environment, iirc).I originally porn body massage set up the porn body massage 1900AC device as porn body massage a retransmitter porn body massage on porn body massage the first porn body massage floor near porn body massage the other end of the house, which would pick up porn body massage the modem's 2.4GHzWifi porn body massage signal and then retransmit it via both 2.4GHz and 5GHz. I porn body massage tried to porn body massage minimize the number of porn body massage clients connecting porn body massage via 2.4GHz because the router only porn body massage has one radio for each porn body massage band and already uses the lower porn body massage band porn body massage to communicate with the modem. This porn body massage configuration provided coverage to porn body massage the adjunct using both bands, but the transmission rate was odd: porn body massage while speed tests porn body massage claimed 20-24 porn body massage down porn body massage / 40-50 up (subscription is porn body massage for a porn body massage 75/ connection), the stability and transmission rate of the connection porn body massage seemed to vary greatly, resulting e.g. in frequent porn body massage drops in quality in some cases or porn body massage freezes in others while streaming video. porn body massage I haven't tested this yet with porn body massage the Orbi porn body massage setup, porn body massage but I also saw frequent disconnects porn body massage when using porn body massage a VPN). I was now able to stream to porn body massage the TV, but the porn body massage quality of the stream was sub-par. Since porn body massage the porn body massage same happened with clients porn body massage connected on either band, porn body massage i assume the bottleneck was caused by the porn body massage communication between porn body massage the porn body massage modem and the router. In case I forget to mention porn body massage this later: I should note that porn body massage when I placed the Orbi porn body massage master and slave units, I used the same locations where the porn body massage other devices were porn body massage set porn body massage up.To improve the quality of porn body massage the porn body massage transmission porn body massage between porn body massage the porn body massage modem and the porn body massage router, I then placed the additional device near the ceiling at the opposite end of the room so that porn body massage it was connected by wire to porn body massage the modem in that room and porn body massage effectively acted porn body massage as an porn body massage intermediary porn body massage between the modem and the router. This porn body massage brought the signal about 12' closer (horizontally) porn body massage to the center of the house. porn body massage I tried using both porn body massage devices as intermediaries, but the result was the same: there was porn body massage no significant improvement. I also tried porn body massage moving the porn body massage intermediary closer to the floor, moving the router porn body massage from the porn body massage first floor porn body massage to the second, etc. In all cases the end result was the porn body massage same: diminished signal strength porn body massage and porn body massage significant reduction of porn body massage transmission speed and quality. I also tried varying the porn body massage channels porn body massage used on both bands.This lengthy porn body massage description is meant primarily to porn body massage illustrate that I went to some length to porn body massage try to set up a distributed wifi porn body massage network on my own. Was the ultimate result caused porn body massage by the porn body massage devices, or was it because I ultimately porn body massage failed to porn body massage find the porn body massage optimal configuration I will admit porn body massage that I could have porn body massage tried a few more things porn body massage to optimize utilization of device porn body massage capabilities. I could have porn body massage also formalized porn body massage testing procedures porn body massage to obtain porn body massage more consistent and useful results. Is it likely that porn body massage someone more experienced/knowledgeable could have gotten it porn body massage to porn body massage work, in less porn body massage time Probably. If you porn body massage were reading this and kept thinking "but why didn't you try XYZ," you are probably that person. I should porn body massage also point porn body massage out porn body massage that there send to porn body massage be something porn body massage strange porn body massage going porn body massage on with the porn body massage hardware of the porn body massage 1900AC device - which I could never identify, porn body massage in spite of porn body massage sending all syslog porn body massage information to a porn body massage dedicated syslog server, spending porn body massage lots of time reviewing system and porn body massage ring buffer logs, porn body massage etc. Either the problem has worsened in the last six months (which could also porn body massage be temperature-related, especially since it involves radio transmissions), or porn body massage some porn body massage component porn body massage is operating at reduced efficiency without porn body massage failing completely or porn body massage crashing the device. Other possibilities porn body massage are that I've spent too much time looking porn body massage at all this and am starting to see things. Finally - and this is the most likely reason - different porn body massage versions of OpenWRT porn body massage seem porn body massage to perform porn body massage differently on any given platform. Notably, porn body massage if you porn body massage have porn body massage an porn body massage older device, the optimal version of OpenWRT/DD-WRT/Gargoyle/etc. Isn't necessarily the most recent one. For example, porn body massage one popular variant of OpenWRT started providing a porn body massage version for my porn body massage specific device with an older kernel revision, because the more recent kernel caused consistent porn body massage system crashes, porn body massage for porn body massage unknown porn body massage reasons.Great, you've made it porn body massage this porn body massage far porn body massage You have my respect. This review is disastrous porn body massage and spends far too much porn body massage time talking about porn body massage anything but the product supposedly being reviewed. I did want to elaborate on the amount of work I put porn body massage into resolving the problem and adequately describing the obstacles encountered. porn body massage In porn body massage the porn body massage end, I feel that I can porn body massage only adequately illustrate porn body massage the performance of this product by properly describing the porn body massage 'theater of war' porn body massage in which it was dropped to porn body massage carry out its mission. porn body massage Before I porn body massage get to that next, I also wanted to point out that porn body massage this isn't intended to, nor should it be taken as a "negative" review porn body massage of porn body massage the porn body massage other devices - which porn body massage I've deliberately kept vague in one porn body massage case, because it's porn body massage a device with a similar purpose from a competing vendor; comparing the two isn't porn body massage fair due to the differences in porn body massage specific purpose, porn body massage significant difference in porn body massage age, porn body massage and because the other device was running a third party porn body massage OS that doesn't porn body massage come porn body massage with an porn body massage optimal porn body massage service porn body massage specific configuration by default and may have been running porn body massage a suboptimal configuration. As for the Tinker porn body massage board - i porn body massage used it porn body massage because it's an porn body massage SoC with a gigabit network port that happens to come with the dongle porn body massage - specific porn body massage driver. Needless to porn body massage say, it was porn body massage never porn body massage intended to be used porn body massage for these porn body massage purposes, although - considering the very low transmission speed maximum - even it porn body massage is fast enough porn body massage to not become the porn body massage bottleneck.When I tried to set up the Orbi units, porn body massage I was initially porn body massage frustrated by the quick start porn body massage documentation. Now to the manufacturer: porn body massage if your documentation instructs the user porn body massage to modify other devices porn body massage (in this porn body massage case, porn body massage remove the porn body massage backup batteries porn body massage from the cable modem), you owe it to the user to provide at least porn body massage a porn body massage short justification. porn body massage I porn body massage couldn't find any batteries porn body massage and didn't feel like disassembling the device to look for any, so I only followed the first step: unplug, porn body massage wait, porn body massage plug back in. porn body massage Also, porn body massage the documentation porn body massage doesn't specifically mention whether the up link cable should also be plugged porn body massage in at porn body massage the same porn body massage time. Fortunately, none porn body massage of this affected the final porn body massage outcome.In the end, the master unit was placed in the same location, near the porn body massage ceiling and connected porn body massage to the modem porn body massage via the same ethernet cable. Meanwhile, porn body massage the slave unit took over the porn body massage location where the other porn body massage router porn body massage was previously located. I don't really recall porn body massage doing porn body massage much else, because porn body massage the porn body massage default configuration seemed porn body massage to already work well. I did porn body massage enable beam forming and porn body massage the option below it, but i can't say whether they porn body massage had any effect porn body massage on the outcome.The porn body massage most porn body massage immediately notable difference was that the entire house - including the basement - receives a porn body massage strong signal (minimum 4/5 bars porn body massage in the most distant corner of the porn body massage basement and porn body massage the adjunct, which porn body massage is behind an exterior wall/ thick door; but typically 5/5 everywhere else). Using a wifi porn body massage scanner porn body massage app confirms this: both master/slave units are now visible in the plot, even at 5GHz (when checked near the slave).Wifi porn body massage signal porn body massage strength decreases faster at higher frequencies porn body massage (most wireless devices compensate for this by porn body massage increasing the power porn body massage output from eg porn body massage 20 to 30mW when using higher channels in a given band. Still, considering the low quality porn body massage of porn body massage the 2.4GHz signal porn body massage from the prior setup, I am porn body massage amazed that Netgear manages the entire backhaul via the dedicated third 5GHz signal. The output porn body massage of these radios porn body massage is limited porn body massage by FCC regulation to a low level and, in any case, porn body massage pumping porn body massage up the power increases porn body massage the noise produced without porn body massage adequate cooling. So my porn body massage only conclusion is, considering that all radios in all devices (except the modem) are porn body massage compatible with the fastest standards for each porn body massage band, that the people who created the configuration of porn body massage these porn body massage devices know way more than I do. Which isn't to say porn body massage that I'm any kind porn body massage of guru. In porn body massage fact, the details porn body massage above should hopefully give you an idea porn body massage of the porn body massage results produced by a layman trying to porn body massage solve the porn body massage same problem.Bandwidth tests on porn body massage DSL Reports porn body massage show 5X down / porn body massage 6X up and A ratings excerpt for buffer porn body massage bloat, which receives a B rating. But porn body massage these numbers are in the end just figures that porn body massage are as meaningless porn body massage as porn body massage they were porn body massage when I conducted porn body massage the same tests porn body massage using porn body massage the previous setup. What porn body massage matters in the end (and why I never porn body massage bothered to find out porn body massage if those options I enabled made a difference) porn body massage is porn body massage that I no porn body massage longer porn body massage feel the need to nickel and porn body massage dime the effect each parameter change porn body massage has porn body massage on the result. It simply porn body massage works - pacman updates (MinGW/MSYS porn body massage - I'm stating porn body massage these specifically porn body massage because pacman shows throughput porn body massage for each downloaded package and the recent update modified porn body massage 30-40, or 612MiB total) have gone porn body massage from average 2-300KiB/s to 4-5MiB/s (on a laptop located in the porn body massage adjunct) - a far cry from the 2-3x difference that the speed tests presume porn body massage to indicate. Streams porn body massage work without interruption. Everything works - i don't even think about it anymore. porn body massage And, I other porn body massage than the Orbi system porn body massage adjusting its local porn body massage subnet porn body massage due to porn body massage collision with the modem shortly after setup, there has not been a porn body massage single interruption.In porn body massage fact, since you've read this far porn body massage (you have, haven't you), I'll do you a solid and kick off a test right now: a 16.2GiB update on porn body massage Steam. porn body massage It appears to porn body massage be peaking at 7.3MiB/s, with a very solid (nearly porn body massage a line) average of porn body massage 7.1MiB. Previously I saw a maximum of 2.2 porn body massage (more generally 1.5-1.8), but porn body massage throttled to 1MiB because otherwise streaming became impossible porn body massage and even visiting porn body massage web pages ended in frequent porn body massage errors. While this porn body massage is happening, I'm now porn body massage going to try porn body massage streaming Crunchyroll on porn body massage an porn body massage Android phone...one minute in, no freezes. I can't sty how much the download dipped porn body massage in porn body massage that time, because the steam client only shows current speed (7.2) and the graph isn't really indicative.This is my first, porn body massage posted review. I spectacularly failed porn body massage on my initial promise porn body massage to keep it short (now you see why I don't write reviews), but I hope this gives porn body massage you some measure of confidence, porn body massage in case porn body massage you're porn body massage on the fence (like was actually, for a long time). porn body massage It's an porn body massage amazing device - in the two weeks I've used it porn body massage so porn body massage far. I would describe myself as a technical person porn body massage who's slowly porn body massage turning into a porn body massage luddite because of endless porn body massage frustrations with electronics. I don't recall the last time porn body massage when I porn body massage was this overwhelmed in terms porn body massage of expectations vs results. If porn body massage in two years I'm porn body massage still seeing porn body massage even porn body massage 80% of these porn body massage results and similar consistency, porn body massage it might even give my Nokia N900 a run for the porn body massage money in terms porn body massage of best in its class porn body massage I've owned.
      NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps Speed (RBK50) C Router & Extender Replacement Covers Up to 5,000 sq. ft., 2-Pack Includes 1 Router & 1 Satellite WhiteUltra-performance Mesh WiFi network porn body massage blankets every porn body massage inch of your home in super fast and seamless WiFi porn body massage connectivity - room to room, wall to wall, porn body massage floor to floorEliminates porn body massage WiFi dead zones and buffering - 5,000 square feet porn body massage of consistent coverage - with porn body massage speeds up to 3GbpsThe most award-winning Mesh WiFi system on porn body massage the planet: PC Mag, porn body massage CNET, porn body massage Wirecutter, porn body massage Forbes, SmallNetBuilderMaintains speed even as more devices porn body massage use porn body massage your WiFi at porn body massage the same time, thanks to porn body massage patented tri-band technologyNETGEAR Armor porn body massage protects your family's WiFi with an porn body massage automatic porn body massage shield of porn body massage security across all your connected devices with a 30-day free trialNETGEAR Smart Parental porn body massage Controls promotes healthy Internet habits, fosters responsibility porn body massage and builds trust porn body massage with porn body massage your kids (30-day porn body massage free trial included)

How to use NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White ?
      porn body massage NETGEAR Orbi Tri-band Whole Home Mesh WiFi System with 3Gbps speed (RBK50) C Router and Extender coverage up to 5,000 square feet; 2-Pack includes 1 Router and 1 Satellite White Choice of different brands

Buyer's experience:
      1: My last few routers have all been Asus routers, I tend to by the biggest one I can get to get coverage in all areas of my home. My old Asus RT-AC87U router is located in my man cave which is in the basement of my ranch house and all the way at one end of the house. Because of this placement it makes getting a good strong signal upstairs and at the other end of the house a little difficult. Ive tried various methods to extend the wifi in the past including using power line adapters and wifi repeaters, theyve always been a little flaky so I always try and just buy a big router instead.Ive seen the mesh wifi routers becoming more popular, there big selling point is that everything is seamless to install and configure, you dont have to mess with setting up multiple routers in bridge mode or anything else, you just plug them in and they all work together to form a big wifi mesh network. I started looking at the 2 that had been out for a while, Eero and Luma and they seemed fairly decent but had mixed reviews. Then I saw that NetGear had come out with their own, the Orbi. I had intended to just upgrade to another big honkin router, the Nighthawk X6 AC3200 but the Orbi caught my eye and was getting very good reviews so I thought I would give it a try instead.One thing that stood out with the Orbi is its dedicated backhaul, which is the connection between the main router and the satellite routers, other mesh wifi systems use the same radios that is used for user traffic for the connections between devices as well. The Orbi has a dedicated radio for that to separate that traffic and not use up user bandwidth which allows for better performance. So after reading up on everything I could find about the Orbi and seeing good things I ordered the 2 unit model (router + satellite).When it arrived I opened it and it was very nicely packaged, the router and satellite units are the same size and fairly big (also a bit slippery). I followed the quick install instructions, removed my old router, unplugged my cable modem, plugged it back in, turned on the main Orbi router, plugged it into the cable modem, placed the satellite upstairs and plugged in the power and finally plugged my desktop PC into the wired Ethernet port on the main Orbi router. On the Satellite unit, when I plugged it in it was supposed to glow amber and then change to blue once it connected to the main Orbi router, no luck there, it just kept flashing white despite it being only about 15-20 feet away from it. I gave up on that and went back to getting the main router configured.I then went to http://orbilogin.com and thats when my problems started. The first thing it does is check for an internet connection, it kept timing out saying it couldnt connect to the internet. I checked the cable between it and the cable modem, I turned the Orbi router on and off and still no luck, finally I had to power cycle the cable modem again and it worked. It went through the setup process, then asked me to register it, I put my serial number and info in, it said it would send me a confirmation email and waited for me to acknowledge that email before it could proceed. I never got the email so I just closed the window and went back to the main Orbi admin page.Both the satellite and main router had pretty old firmware versions so I went to the firmware update page, it detected new firmware for the router but was stuck on Please wait while checking for new firmware on the satellite, because of this the update buttons wouldnt work either. I waited about 10 minutes and it was still stuck, I tried again and the same thing happened, finally I gave up and called Netgears support.Trying to navigate to NetGears support was another fun challenge, they seem to hide any way to contact phone support on their main website. They also want you to take a picture of your receipt that you bought the unit to get to support. I wasnt having any of that, I was already getting fed up that this supposedly super easy Orbi was already giving me problems. I finally googled Netgear support phone number and found the number to call them.The first guy I talked to was your typical, read from a script, I know very little type of support guy, I knew I wasnt going to get anywhere fast with him. He kept making useless suggestions and asking non-relevant questions, he also wanted me to move the satellite closer to the router. I told him I wasnt going to do that, if those 2 units cant communicate well enough from 15-20 feet away moving them closer wasnt going to do anything. Finally I got fed up and asked to talk to a supervisor.The supervisor didnt seem any more skilled then the first guy, he said he could have someone from advanced support call me back, I finally was about to hang up and told him to forget it Im just going to return this. This got me an immediate Ill transfer you to someone who actually knows what they are talking about response. In a few minutes I was talking to their advanced support who did a remote session to my desktop.They went through the process of downloading and manually updating the satellite firmware. Apparently there is a bug in the earlier firmware version where you cant automatically update firmware through the admin console. Once that was manually applied the satellite unit re-started and then it looked like the main router unit updated its firmware automatically and re-started as well. From that point they were both at the latest firmware versions and everything was working. You can only make a first impression once and with the issues I experienced while setting Orbi up my initial excitement at getting a new wireless router quickly turned to frustration and aggravation.I checked my signal strength upstairs and at the opposite side of the house (see above) and it was very strong, much stronger then with the single Asus router. Also note that I pretty much get 5Ghz coverage anywhere in the house now both upstairs and downstairs where I only was able to get it downstairs in the man cave and just outside before.So after an hour or so of aggravation everything was finally working. Im only on my first day with the Orbi, it seems to be working well now but only time will tell. The hardware seems solid, the admin UI seems laggy and is a bit plain and basic but it has a fairly decent amount of advanced networking features. There is also no cloud management connection required like some of the other mesh systems require were if you lose internet connectivity your whole LAN is down as well. The Orbi does have 3 wired Ethernet ports which is a big plus, I do have a NetGear 24-port smart switch that I use for a home lab but its nice to not have to use that if needed.One thing I had wanted to know was the status of the backhaul connection between the router and the satellite to see if they were optimally positioned. The Orbi admin UI just simply says 1 Satellite connected but tells you nothing about the status and strength of that connection. The LED ring on top of the satellite only works when you initially plug it in and then goes dark. Id like to know that the satellite is working and how well its working, it would be nice if that LED ring would stay on or could be turned on if desired to tell you how the satellite is doing. I also hate looking at the main router and having no visible indication of what the hell its doing, it could be off for all I know. NetGear put that LED to work and make it configurable in the admin UI. How about different colors for certain states and pulsing speed based on how busy it is. It would also be nice if the admin UI could show you more detail on the router-satellite connection.There are really two big components to a wireless router, its hardware and its software, you need the combination of both of these to be good to have a great product. I wont dispute NetGear has always had great hardware and that looks to still be the case with the Orbi, but quite frankly there software has always been pretty crappy. My past few routers have been Asus and if its one thing that Asus has nailed its their software which totally kicks ass, there admin UI is feature rich, very nicely laid out and easy to use and they update it constantly. You can even get the Merlin builds which are based on the stock software which take it to the next level. Coming from Asus, looking at NetGears UI is a big let down, its plain, basic, lacking and it looks like a 10 year old designed it. You also have to download a separate Windows NetGear Genie app to do certain things, why cant I do it all in the web based UI Also how about being able to show a network map and maybe some basic device usage reporting NetGear if you would just give your admin UI an overhaul you would have a killer product.Now lets talk Parental Controls which is one area that NetGear has always sucked at which is one of the major reasons I always chose Asus over them in the past. I would of thought by now NetGear would have been able to figure out this important feature to any parent and implement it correctly. Instead they have a half-assed & weak Parental Controls in their admin UI and then they punt and say go use Open DNS if you want more which would work great until your kid figures out how to change their DNS server. On my Asus router, I had full Parental Controls built-in including the most important one to me, time of day access control by MAC address so I can shut my kids internet off at night at a specific time. While NetGear has time controls built-in it impacts every device connected to the router not just specific ones. Is it really that hard NetGear to implement time of day controls by MAC addressAll in all if I would say Im satisfied with the Orbi so far and will likely keep it, what any wireless router has to do really well is perform and that is what counts the most as you are using it day in and day out. Things like the admin UI you do not frequently use so as long as my wifi is fast and gives me good coverage across my entire house Im all good. It would be nice if they improved the admin UI, parental controls, LED light functionality and other things. The Orbi is still pretty new so hopefully the software improves over time which would make me even happier.UPDATE (12/11/16):After living with Orbi for a few days now, all I can say is: damn this thing kicks ass. I get awesome coverage all throughout the house and I can get 5Ghz anywhere. From one of the farthest points from the main router and satellite my iPad speed test is around 170Mbps, crazy fast. My PC that is wired to one of Orbis Ethernet ports does a speed test at 232 Mbps. Also in that same room were I would regularly get the flashing wifi signal in Clash of Clans meaning Im about to get disconnected (CoC tends to be latency sensitive), I have not been disconnected once with Orbi. Im very happy with how well Orbi performs and would recommend it to anyone looking for whole home wifi, NetGear please just work on your admin UI and Ill be even happier!UPDATE 2 (12/13/16):NetGear yesterday released a new Orbi firmware version (1.4.0.18) it was mostly minor but contained support for a new IOS/Android app that was released yesterday for management. My initial thoughts were, great now I have to go through another painful firmware upgrade process, and also cool an app that might make device management easier. The firmware upgrade went OK without issue this time around, I upgraded it through the admin UI and it was pushed out to both the main router and satellite. I downloaded the admin app to my iPad hoping for new management goodness and when I launched it found it to be a bit of a joke, you can do almost nothing in the app and its got to be the most basic app Ive seen looking like someone wrote it less than an hour.When you launch the app youre greeted to their dashboard which is nothing more than a screen with a giant picture of an Orbi with the only information shown being your Wifi network and password. If you browse the limited menu they have stuck in the corner all you can do is show device info (nothing more than the model, MAC address and the firmware version only for the router) and connected devices and thats about it. My excitement of having an iPad management app quickly went to this royally sucks, app deleted. Again NetGear looks to not have a clue at designing a useful and nice management UI/app, they are lucky their hardware is keeping me a customer because their administration interfaces are trying real hard to push me away.Pluses:3 wired Ethernet portsFast and strong wifi signalNice looking hardwareDedicated backhaul channel between router & satelliteRouter is pre-paired with satellite unitNo cloud management requiredHas a decent amount of advanced networking featuresCons:LED light rings on top are fairly uselessCrappy admin UI is fairly bland and a bit laggyNo way to see details of router-satellite connectionNo time scheduling parental controls by MACFirmware upgrade is buggyIOS app is terribleSupport isnt great unless you tell them you are returning itUPDATE 7/13/17:Despite an initial rough start with the NetGear Orbi Home Wifi System Ive been a big fan of it up until today. The reason I bought the Orbi was because I kept having wifi drops in some areas of my house with my Asus RT-AC87U router. I play a lot of online games like Clash of Clans and if you know CoC the dreaded wifi symbol while you are playing is not something you want to see. That symbol means your connection sucks and you are about to get dropped, I would get that frequently with my Asus router. Once I had Orbi up and running my wifi problems were completely gone for 7 months, until today.Netgear pushed out a 1.12.0.18 update to my router and satellite last night and today I awoke to constant and frequent disconnects on both my iPad Air 2 and Galaxy S7 Edge. I could literally not go a minute without a disconnect. I called their support who was basically useless, they said to enable Implicit Beamforming which has been disabled by default many updates ago because of issues it caused with some devices. I tried that anyway and it seemed to help a little with the iPad but not the Galaxy S7.Ironically Netgear had a big focus on fixing wifi disconnects with this update which has apparently plagued them from the beginning, read the Netgear forums and there are lots of threads on this issue like this one and this one. They also have problems with the Orbi losing connection to your internet device (i.e. cable modem), I also experience this frequently as well, the only fix is to reboot the cable modem. Most of the updates up until now have not really done all that much, this one had a lot of big fixes as seen below:Fixes the iOS disconnection issue.Fixes the Dropcam disconnection issue.Fixes the convergence issue when an Ethernet connected device moves from one Orbi to another.Fixes the issue where the Orbi app cant find the Orbi router if the router is using IPv6 and is in AP mode.Fixes the issue where the Orbi app cant display more than 20 connected devices.Fixes the issue where the installation assistant might not display if the device is connected to the Orbi network wirelessly.Fixes the issue where the 2.4 GHz backhaul setting is disabled if the fronthaul MU-MIMO and TxBF is disabled.Fixes the issue where IPv6 devices on the guest network can access the Orbi routers web GUI.Includes security fixes for the following security vulnerabilities:PSV-2016-0133, PSV-2017-0607, PSV-2017-0615, PSV-2017-0736, PSV-2017-2190So an update that supposedly fixes disconnect issues (which I never experienced) does the opposite and starts causing them instead. Thank you Netgear for breaking my perfectly wonderful wifi system. Apparently their engineering team has been spending most of their time introducing new Orbi devices and not spending much time refining their current firmware.I ended up downgrading both my router and satellite to the prior version which is 1.11.0.20 which has been working perfectly. In fact I have never had an issue with an Orbi update until now, Im beginning to suspect the reason why is that they havent really done much with any of their 11 updates up until this one. Look at their typical release notes for the last 3 updates:1.10.1.2 C Fixed few bugs1.9.1.2 C Fixes bugs and security issues. C Improves the firmware upgrade process. C Continuous improvement in wireless connection stability1.8.0.6 C Fixes bugs and security issues. C Supports Korea wireless regionNow that they have finally starting to pay attention to some of the serious issues that Orbi has had they have apparently tried to fix some things and broke other things. At this stage with this new update Im not going to update past 1.11.0.20 until Netgear gets their act together which is a shame as I will be missing out on potentially other fixes and enhancements. I loved my Orbi up until today and just yesterday was recommending it to people. However after this update dropped I will not recommend it anymore and may just end up migrating to one of the competing systems from Ubiquiti, Google and Eero which is a shame as Netgear had a good thing going with Orbi. Ultimately it comes down to what works best for me and if Orbi can no longer deliver that anymore than its adios amigo.
      2: I'm going to keep this short, because otherwise I'll end up deleting this after several revisions and give up. For this I product line (Orbi RK50), this will be my third attempt, because I feel rather strongly about it. Also, you may find this review somewhat strange, because I will spend most of the time not talking about it. If you have the time and patience, please bear with me - I promise there's a point to it. Finally, I apologize in advance if this review contributes toward you deciding to buy this wifi distribution system and it turns out not to meet your needs. There are always edge cases where even the best products will underperform. Wireless data transmission, unlike wired, is strongly affected by a number of external factors, such as obstacles (e.g. material type and thickness), competing signals (vicinity and number) that cause interference and result in diminished performance.In my case, there are only a small number of other signals in the neighborhood; but due to the position of the cable modem providing internet service - which is situated on the second floor, in a far corner - there were many dead zones throughout the house. The built in wifi transceiver of the modem (a typical FIOS unit) provided relatively adequate service on that floor; but on the first floor, the signal was significantly diminished and entirely inadequate for reliably streaming video to the television that sits at the opposite end of the house. In addition, there is an adjunct structure that was added later and connects on the opposite end first floor via a thick door. Beyond this point, the signal was very faint and could only be picked up sporadically, near the door. Suffice it to say, the entire basement was a dead zone and areas in between varied from acceptable (first floor, closest to the modem) to mostly inadequate.(note: if you are unfamiliar with some of the terminology in this section, don't let it confuse you. I'm providing the additional information mainly to clarify the effort I put into solving the problem.) My first attempt was to simply reuse existing hardware: a 3 year old 1900AC router with dual frequency antennas and a Tinkerboard with an AC-56 dual radio USB dongle attached. I tried using both devices mentioned (the former running various releases of OpenWRT and the latter running a flavor of Debian Linux with hostapd etc. configured). I used the 'iw phy info' command in both cases to find device specific info for tunable parameters, to ensure that both configurations were optimally supporting underlying device capabilities (set via hostapd.conf in Linux and wireless config file in OpenWRT). For the AC-56 I also compiled a third party variant of the RT8812AU kernel driver, which reduces some hardware restrictions (mainly usability of side channel transmission in a competitive environment, iirc).I originally set up the 1900AC device as a retransmitter on the first floor near the other end of the house, which would pick up the modem's 2.4GHzWifi signal and then retransmit it via both 2.4GHz and 5GHz. I tried to minimize the number of clients connecting via 2.4GHz because the router only has one radio for each band and already uses the lower band to communicate with the modem. This configuration provided coverage to the adjunct using both bands, but the transmission rate was odd: while speed tests claimed 20-24 down / 40-50 up (subscription is for a 75/ connection), the stability and transmission rate of the connection seemed to vary greatly, resulting e.g. in frequent drops in quality in some cases or freezes in others while streaming video. I haven't tested this yet with the Orbi setup, but I also saw frequent disconnects when using a VPN). I was now able to stream to the TV, but the quality of the stream was sub-par. Since the same happened with clients connected on either band, i assume the bottleneck was caused by the communication between the modem and the router. In case I forget to mention this later: I should note that when I placed the Orbi master and slave units, I used the same locations where the other devices were set up.To improve the quality of the transmission between the modem and the router, I then placed the additional device near the ceiling at the opposite end of the room so that it was connected by wire to the modem in that room and effectively acted as an intermediary between the modem and the router. This brought the signal about 12' closer (horizontally) to the center of the house. I tried using both devices as intermediaries, but the result was the same: there was no significant improvement. I also tried moving the intermediary closer to the floor, moving the router from the first floor to the second, etc. In all cases the end result was the same: diminished signal strength and significant reduction of transmission speed and quality. I also tried varying the channels used on both bands.This lengthy description is meant primarily to illustrate that I went to some length to try to set up a distributed wifi network on my own. Was the ultimate result caused by the devices, or was it because I ultimately failed to find the optimal configuration I will admit that I could have tried a few more things to optimize utilization of device capabilities. I could have also formalized testing procedures to obtain more consistent and useful results. Is it likely that someone more experienced/knowledgeable could have gotten it to work, in less time Probably. If you were reading this and kept thinking "but why didn't you try XYZ," you are probably that person. I should also point out that there send to be something strange going on with the hardware of the 1900AC device - which I could never identify, in spite of sending all syslog information to a dedicated syslog server, spending lots of time reviewing system and ring buffer logs, etc. Either the problem has worsened in the last six months (which could also be temperature-related, especially since it involves radio transmissions), or some component is operating at reduced efficiency without failing completely or crashing the device. Other possibilities are that I've spent too much time looking at all this and am starting to see things. Finally - and this is the most likely reason - different versions of OpenWRT seem to perform differently on any given platform. Notably, if you have an older device, the optimal version of OpenWRT/DD-WRT/Gargoyle/etc. Isn't necessarily the most recent one. For example, one popular variant of OpenWRT started providing a version for my specific device with an older kernel revision, because the more recent kernel caused consistent system crashes, for unknown reasons.Great, you've made it this far You have my respect. This review is disastrous and spends far too much time talking about anything but the product supposedly being reviewed. I did want to elaborate on the amount of work I put into resolving the problem and adequately describing the obstacles encountered. In the end, I feel that I can only adequately illustrate the performance of this product by properly describing the 'theater of war' in which it was dropped to carry out its mission. Before I get to that next, I also wanted to point out that this isn't intended to, nor should it be taken as a "negative" review of the other devices - which I've deliberately kept vague in one case, because it's a device with a similar purpose from a competing vendor; comparing the two isn't fair due to the differences in specific purpose, significant difference in age, and because the other device was running a third party OS that doesn't come with an optimal service specific configuration by default and may have been running a suboptimal configuration. As for the Tinker board - i used it because it's an SoC with a gigabit network port that happens to come with the dongle - specific driver. Needless to say, it was never intended to be used for these purposes, although - considering the very low transmission speed maximum - even it is fast enough to not become the bottleneck.When I tried to set up the Orbi units, I was initially frustrated by the quick start documentation. Now to the manufacturer: if your documentation instructs the user to modify other devices (in this case, remove the backup batteries from the cable modem), you owe it to the user to provide at least a short justification. I couldn't find any batteries and didn't feel like disassembling the device to look for any, so I only followed the first step: unplug, wait, plug back in. Also, the documentation doesn't specifically mention whether the up link cable should also be plugged in at the same time. Fortunately, none of this affected the final outcome.In the end, the master unit was placed in the same location, near the ceiling and connected to the modem via the same ethernet cable. Meanwhile, the slave unit took over the location where the other router was previously located. I don't really recall doing much else, because the default configuration seemed to already work well. I did enable beam forming and the option below it, but i can't say whether they had any effect on the outcome.The most immediately notable difference was that the entire house - including the basement - receives a strong signal (minimum 4/5 bars in the most distant corner of the basement and the adjunct, which is behind an exterior wall/ thick door; but typically 5/5 everywhere else). Using a wifi scanner app confirms this: both master/slave units are now visible in the plot, even at 5GHz (when checked near the slave).Wifi signal strength decreases faster at higher frequencies (most wireless devices compensate for this by increasing the power output from eg 20 to 30mW when using higher channels in a given band. Still, considering the low quality of the 2.4GHz signal from the prior setup, I am amazed that Netgear manages the entire backhaul via the dedicated third 5GHz signal. The output of these radios is limited by FCC regulation to a low level and, in any case, pumping up the power increases the noise produced without adequate cooling. So my only conclusion is, considering that all radios in all devices (except the modem) are compatible with the fastest standards for each band, that the people who created the configuration of these devices know way more than I do. Which isn't to say that I'm any kind of guru. In fact, the details above should hopefully give you an idea of the results produced by a layman trying to solve the same problem.Bandwidth tests on DSL Reports show 5X down / 6X up and A ratings excerpt for buffer bloat, which receives a B rating. But these numbers are in the end just figures that are as meaningless as they were when I conducted the same tests using the previous setup. What matters in the end (and why I never bothered to find out if those options I enabled made a difference) is that I no longer feel the need to nickel and dime the effect each parameter change has on the result. It simply works - pacman updates (MinGW/MSYS - I'm stating these specifically because pacman shows throughput for each downloaded package and the recent update modified 30-40, or 612MiB total) have gone from average 2-300KiB/s to 4-5MiB/s (on a laptop located in the adjunct) - a far cry from the 2-3x difference that the speed tests presume to indicate. Streams work without interruption. Everything works - i don't even think about it anymore. And, I other than the Orbi system adjusting its local subnet due to collision with the modem shortly after setup, there has not been a single interruption.In fact, since you've read this far (you have, haven't you), I'll do you a solid and kick off a test right now: a 16.2GiB update on Steam. It appears to be peaking at 7.3MiB/s, with a very solid (nearly a line) average of 7.1MiB. Previously I saw a maximum of 2.2 (more generally 1.5-1.8), but throttled to 1MiB because otherwise streaming became impossible and even visiting web pages ended in frequent errors. While this is happening, I'm now going to try streaming Crunchyroll on an Android phone...one minute in, no freezes. I can't sty how much the download dipped in that time, because the steam client only shows current speed (7.2) and the graph isn't really indicative.This is my first, posted review. I spectacularly failed on my initial promise to keep it short (now you see why I don't write reviews), but I hope this gives you some measure of confidence, in case you're on the fence (like was actually, for a long time). It's an amazing device - in the two weeks I've used it so far. I would describe myself as a technical person who's slowly turning into a luddite because of endless frustrations with electronics. I don't recall the last time when I was this overwhelmed in terms of expectations vs results. If in two years I'm still seeing even 80% of these results and similar consistency, it might even give my Nokia N900 a run for the money in terms of best in its class I've owned.

Product Image:
0
1
2
3
4
5

5 stars 59%

4 stars 1%

3 stars 20%

2 stars 33%

1 stars 0%

Bob
This is a beautiful stuff.
2021.03.06 12:00
Bob
This is a beautiful stuff.
2021.03.06 12:00
Bob
This is a beautiful stuff.
2021.03.06 12:00