Watch Full Video, First Turn Off Your Adblock

Watch Full Video, First Turn Off Your Adblock

Watch Full Video, First Turn Off Your Adblock

Watch Full Video, First Turn Off Your Adblock


marvel pyjamas NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac 100% cotton
marvel pyjamas NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac 100% cotton
marvel pyjamas NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac 100% cotton
marvel pyjamas NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac 100% cotton
marvel pyjamas NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac 100% cotton

marvel pyjamas NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac 100% cotton

Item code #:sku-iLQSRv
$USD 211.000$USD 242.000

629 in stock.

QTY:

What is marvel pyjamas NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac 100% cotton?
      Four built-in Gigabit Ethernet ports to marvel pyjamas connect marvel pyjamas to PC, laptops, and other wired devicesFast dual band 802.11ac WiFi marvel pyjamas at a combined aggregate speed marvel pyjamas of 1.2 Gbps marvel pyjamas (300Mbps at 2.4 GHz and marvel pyjamas 867Mbps at 5 marvel pyjamas GHz)I have the router for my home setup marvel pyjamas in my living marvel pyjamas room. The signal reaches most marvel pyjamas of the house, but it isnt stable in my bedroom. After trying and marvel pyjamas failing with a wifi extender, marvel pyjamas I decided to try an access point.I found marvel pyjamas this model on sale and marvel pyjamas decided to try marvel pyjamas it since my router marvel pyjamas is also a Netgear. The marvel pyjamas extra Lan marvel pyjamas ports were able marvel pyjamas to cover the marvel pyjamas three marvel pyjamas wired marvel pyjamas devices that needed it. The wireless signal marvel pyjamas is marvel pyjamas pretty decent. The signal is marvel pyjamas about marvel pyjamas the marvel pyjamas same as the router and reaches outside the room through most marvel pyjamas of the marvel pyjamas house.My complaint with this access point is with the initial marvel pyjamas setup. I tried following the instructions, but could marvel pyjamas not access the setup address that was listed. I eventually downloaded the marvel pyjamas Netgear Insight app marvel pyjamas and manually marvel pyjamas selected the marvel pyjamas access point by marvel pyjamas matching marvel pyjamas the marvel pyjamas MAC address on the bottom. It marvel pyjamas turns out that the marvel pyjamas address to set up the access point was marvel pyjamas different marvel pyjamas than what was listed in marvel pyjamas the instructions. If you get this model and experience issues with marvel pyjamas the address they marvel pyjamas provide, marvel pyjamas try the app.Advanced Security and marvel pyjamas Flexible Wireless Configuration - access point, marvel pyjamas and marvel pyjamas WDS marvel pyjamas point-to-point, point-to-multipoint marvel pyjamas wireless marvel pyjamas bridge mode. Memory:128MB marvel pyjamas NAND flash marvel pyjamas and 128MB DDR3 RAMWe marvel pyjamas have been on Starlink for about three months. Like marvel pyjamas other users, our smart garage door which uses marvel pyjamas the "myQ" app stopped working with marvel pyjamas Starlink's wireless connection. After a number of attempts marvel pyjamas to marvel pyjamas get it connected, an =internet search came across others having the same problem. marvel pyjamas The universal solution was to use a wireless access point. The NETGEAR WAC104 seemed like marvel pyjamas it was what we needed. It was!We marvel pyjamas have the current generation antenna (the rectangle one) and have marvel pyjamas the add-on Starlink Ethernet adapter marvel pyjamas for wired marvel pyjamas ethernet. marvel pyjamas Using marvel pyjamas an ethernet cable, I connected marvel pyjamas the output of the Starlink ethernet adapter marvel pyjamas into the NETGEAR marvel pyjamas WAC104. I then connected our HD TV screen into another port of marvel pyjamas the WAC104. So another question marvel pyjamas - marvel pyjamas Does marvel pyjamas the WAC104 work as a switch or hub YES! It will even work wirelessly, receiving the wireless signal from point marvel pyjamas A and relaying it wirelessly marvel pyjamas or by ethernet cable. Of course, wired marvel pyjamas is faster and more dependable that wireless.Read marvel pyjamas and marvel pyjamas follow the setup marvel pyjamas instructions carefully, and be marvel pyjamas sure marvel pyjamas to change marvel pyjamas the names and marvel pyjamas password for the marvel pyjamas 2.4GHz marvel pyjamas and 5GHz marvel pyjamas access point connections using the online setup marvel pyjamas (explained in the instructions). If you have marvel pyjamas not done that marvel pyjamas before, or marvel pyjamas are marvel pyjamas not "tech handy," the nomenclature and all the abbreviations can marvel pyjamas be marvel pyjamas tough to get marvel pyjamas through, but that is not just this AP (access point). marvel pyjamas There- you just marvel pyjamas learned your first one! ;-)Works marvel pyjamas with marvel pyjamas all N150, N300, marvel pyjamas N600 and AC devices. IPV6 support for improved performanceOnce marvel pyjamas you marvel pyjamas get it set up, it works fantastic. Strong wireless signal marvel pyjamas on marvel pyjamas both 2.4 and 5 bands. Super-fast wireless from my marvel pyjamas 900MB marvel pyjamas home broadband. Excellent access point.The only marvel pyjamas thing is, marvel pyjamas as others have said, marvel pyjamas is that marvel pyjamas the instructions for marvel pyjamas how marvel pyjamas to "just plug it in marvel pyjamas to a marvel pyjamas port on the router, and DHCP will marvel pyjamas take over, and then marvel pyjamas set it up" are marvel pyjamas unproductive. marvel pyjamas The marvel pyjamas default setup in the AP is for DHCP, but for the wrong marvel pyjamas network due to its marvel pyjamas default IP marvel pyjamas address of 192,.168.0.100. marvel pyjamas My router is 192.168.1.1, and marvel pyjamas the AP doesn't marvel pyjamas get set up properly marvel pyjamas by DHCP. I tried to follow these instructions first, and as others have said it just marvel pyjamas doesn't marvel pyjamas succeed, marvel pyjamas for the obvious marvel pyjamas reasons.But I've had prior experience marvel pyjamas with an earlier version marvel pyjamas of the Netgear access points, model WN604. The setup approach marvel pyjamas in that older model was outright marvel pyjamas described marvel pyjamas for manual method, temporarily connecting directly to a laptop or PC via marvel pyjamas ethernet cable. These are exactly the same manual configuration instructions marvel pyjamas as are described in the user manual for marvel pyjamas this new WAC104. Once you take this manual approach, instead of the DHCP approach, it's just a few minutes to complete the setup and get the WAC104 marvel pyjamas prepared for actually being marvel pyjamas connected on my 192.168.1.1 network.You first need to marvel pyjamas get your marvel pyjamas laptop marvel pyjamas or PC into marvel pyjamas the TCP/IPv4 properties, marvel pyjamas in order marvel pyjamas to marvel pyjamas change marvel pyjamas from "DHCP" to "manual static marvel pyjamas IP" mode. This marvel pyjamas is from Network marvel pyjamas and Sharing Center, and then click on marvel pyjamas "Change adapter settings", marvel pyjamas and then select your ethernet connection object, and right-click marvel pyjamas and select Properties marvel pyjamas to get marvel pyjamas the Properties dialog window. Then select the "Internet Protocol Version 4 (TCP/IPv4)" item, and push the PROPERTIES button. marvel pyjamas You're probably in "obtain an IP address marvel pyjamas automatically" mode, marvel pyjamas which marvel pyjamas means your PC/laptop is marvel pyjamas normally handled by DHCP from your router. Temporarily marvel pyjamas you marvel pyjamas must instead change this to "Use the following IP address", to assign a static IP (as described in the manual setup instructions of the marvel pyjamas WAC104 user marvel pyjamas guide) that will make the WAC104 marvel pyjamas directly visible marvel pyjamas to your PC/laptop.Enter an IP address of say 192.168.0.201, and a subnet mask of 255.255.255.0, marvel pyjamas and you can leave the "default gateway" blank. Then push OK, marvel pyjamas and OK your way all marvel pyjamas the way back out, and marvel pyjamas shut down. Then marvel pyjamas disconnect the ethernet cable marvel pyjamas from your marvel pyjamas PC/laptop to your LAN, and instead connect it from marvel pyjamas the PC/laptop directly to one port of the WAC104. Now marvel pyjamas re-boot the PC/laptop, and ignore any startup errors marvel pyjamas you might marvel pyjamas get from any of your software marvel pyjamas that marvel pyjamas might complain about not being marvel pyjamas able to get to the internet.On the computer, open a web marvel pyjamas browser and enter marvel pyjamas 192.168.0.100 in marvel pyjamas the marvel pyjamas address bar. A login window opens.Enter marvel pyjamas the marvel pyjamas access point user name and password.The default marvel pyjamas user name marvel pyjamas is admin. marvel pyjamas The default password is marvel pyjamas password. The user name and password arecase-sensitive. marvel pyjamas You can change these marvel pyjamas default values later as part of your setup, if you want.The Home page displays.Customize the access point settings for marvel pyjamas your network environment. My marvel pyjamas approach was to marvel pyjamas configure marvel pyjamas the marvel pyjamas WAC104 for "static IP" (not DHCP), exactly as marvel pyjamas I did with my previous WN604. I picked a marvel pyjamas known marvel pyjamas available marvel pyjamas and currently unused IP address of 192.168.1.124, with a subnet marvel pyjamas mask of 255.255.255.0, and marvel pyjamas a default gateway of 192.168.1.1, and a primary DNS server of 192.168.1.1. This means marvel pyjamas in normal operation marvel pyjamas your WAC104 marvel pyjamas will always have a static marvel pyjamas IP address of 192.168.1.124 from your marvel pyjamas router at 192.168.1.1. And that marvel pyjamas means you can marvel pyjamas always subsequently get back into the setup dialog marvel pyjamas of the WAC104 if you marvel pyjamas want marvel pyjamas to, by using a browser and addressing it via 192.168.1.124.I also set my desired new SSID network marvel pyjamas names for the 2.4 and 5 networks, along with the new marvel pyjamas passwords (i.e. marvel pyjamas "passphrase") for those WiFi network marvel pyjamas signins.I also set marvel pyjamas wireless marvel pyjamas security to "WPA2-PSK [AES]", for maximum wireless speed on both 2.4/5 bands. At marvel pyjamas first I checked "WPA-PSK [TKIP] + WPA2-PSK [AES]" but marvel pyjamas when I pushed marvel pyjamas APPLY I marvel pyjamas was warned marvel pyjamas about marvel pyjamas the full-speed limitation of this option, something I wasn't aware of. marvel pyjamas So I instead marvel pyjamas checked the "WPA2-PSK marvel pyjamas [AES]" option marvel pyjamas which marvel pyjamas is marvel pyjamas perfectly fine marvel pyjamas with me.If marvel pyjamas you want marvel pyjamas you can also change the WAC104 login username and password through the Administration marvel pyjamas -> Set password marvel pyjamas dialog.Push marvel pyjamas the APPLY button, to save all marvel pyjamas customized settings.After you complete the marvel pyjamas setup go back into Network and Sharing Center, etc., and change the PC/laptop TCPIPv4 marvel pyjamas properties back marvel pyjamas to original marvel pyjamas IP address or DHCP. Then marvel pyjamas shut down marvel pyjamas the marvel pyjamas computer and power-off the WAC104, and disconnect everything.Now you can reconnect marvel pyjamas the PC/laptop with ethernet cable marvel pyjamas back to your router, and marvel pyjamas reboot. marvel pyjamas Everything should be back to normal marvel pyjamas again.And you can marvel pyjamas connect the WAC104 through its own marvel pyjamas ethernet cable marvel pyjamas run marvel pyjamas to marvel pyjamas an open port on your router (or remote switch). Power-on the WAC104, marvel pyjamas and marvel pyjamas wait for the lights to stabilize. You should now be able to confirm that you see the two new 2.4/5 WiFi networks using your marvel pyjamas smart marvel pyjamas phone and a WiFi marvel pyjamas Analyzer app.You should also confirm from marvel pyjamas your marvel pyjamas PC/laptop that you can also get to marvel pyjamas 192.168.1.124 via a marvel pyjamas browser.Simple and marvel pyjamas straightforward. Just manually connect static-IP PC/laptop via ethernet cable directly to the WAC104 for setup.Factory tuned external antennas provide superior signal and far reaching WiFi marvel pyjamas coverageEasy to setup and configure marvel pyjamas with WiFi marvel pyjamas Protected System (WPS) marvel pyjamas button marvel pyjamas for marvel pyjamas easy one-touch marvel pyjamas client connectivityMaximum Range : 1000 Sq Ft
      NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed | 3 x 1G Ethernet Ports | Up to 64 Devices | WPA2 Security | Desktop | MU-MIMO | Supports 3 SSIDs | 802.11acMaximum Range marvel pyjamas : 1000 Sq marvel pyjamas FtFast dual band 802.11ac WiFi at a combined aggregate speed of marvel pyjamas 1.2 Gbps marvel pyjamas (300Mbps at 2.4 GHz and 867Mbps at 5 GHz)Factory marvel pyjamas tuned external marvel pyjamas antennas provide superior signal and marvel pyjamas far reaching WiFi coverageAdvanced Security and Flexible marvel pyjamas Wireless marvel pyjamas Configuration - marvel pyjamas access point, and WDS marvel pyjamas point-to-point, point-to-multipoint marvel pyjamas wireless bridge mode. marvel pyjamas Memory:128MB NAND marvel pyjamas flash and 128MB DDR3 RAMWorks with all N150, N300, N600 and AC devices. IPV6 marvel pyjamas support for improved performanceEasy to setup and marvel pyjamas configure marvel pyjamas with WiFi Protected System (WPS) button for easy one-touch client connectivityFour built-in marvel pyjamas Gigabit Ethernet marvel pyjamas ports marvel pyjamas to connect to PC, laptops, and other marvel pyjamas wired devices

How to use NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac ?
      marvel pyjamas NETGEAR Wireless Desktop Access Point (WAC104) - WiFi 5 Dual-Band AC1200 Speed ​​| 3 x 1G Ethernet Ports | 64 Machines | Up to WPA2 security | Dat | MU-MIMO | 3 SSIDs | support 802.11ac 100% cotton

Buyer's experience:
      1: I have the router for my home setup in my living room. The signal reaches most of the house, but it isnt stable in my bedroom. After trying and failing with a wifi extender, I decided to try an access point.I found this model on sale and decided to try it since my router is also a Netgear. The extra Lan ports were able to cover the three wired devices that needed it. The wireless signal is pretty decent. The signal is about the same as the router and reaches outside the room through most of the house.My complaint with this access point is with the initial setup. I tried following the instructions, but could not access the setup address that was listed. I eventually downloaded the Netgear Insight app and manually selected the access point by matching the MAC address on the bottom. It turns out that the address to set up the access point was different than what was listed in the instructions. If you get this model and experience issues with the address they provide, try the app.
      2: Once you get it set up, it works fantastic. Strong wireless signal on both 2.4 and 5 bands. Super-fast wireless from my 900MB home broadband. Excellent access point.The only thing is, as others have said, is that the instructions for how to "just plug it in to a port on the router, and DHCP will take over, and then set it up" are unproductive. The default setup in the AP is for DHCP, but for the wrong network due to its default IP address of 192,.168.0.100. My router is 192.168.1.1, and the AP doesn't get set up properly by DHCP. I tried to follow these instructions first, and as others have said it just doesn't succeed, for the obvious reasons.But I've had prior experience with an earlier version of the Netgear access points, model WN604. The setup approach in that older model was outright described for manual method, temporarily connecting directly to a laptop or PC via ethernet cable. These are exactly the same manual configuration instructions as are described in the user manual for this new WAC104. Once you take this manual approach, instead of the DHCP approach, it's just a few minutes to complete the setup and get the WAC104 prepared for actually being connected on my 192.168.1.1 network.You first need to get your laptop or PC into the TCP/IPv4 properties, in order to change from "DHCP" to "manual static IP" mode. This is from Network and Sharing Center, and then click on "Change adapter settings", and then select your ethernet connection object, and right-click and select Properties to get the Properties dialog window. Then select the "Internet Protocol Version 4 (TCP/IPv4)" item, and push the PROPERTIES button. You're probably in "obtain an IP address automatically" mode, which means your PC/laptop is normally handled by DHCP from your router. Temporarily you must instead change this to "Use the following IP address", to assign a static IP (as described in the manual setup instructions of the WAC104 user guide) that will make the WAC104 directly visible to your PC/laptop.Enter an IP address of say 192.168.0.201, and a subnet mask of 255.255.255.0, and you can leave the "default gateway" blank. Then push OK, and OK your way all the way back out, and shut down. Then disconnect the ethernet cable from your PC/laptop to your LAN, and instead connect it from the PC/laptop directly to one port of the WAC104. Now re-boot the PC/laptop, and ignore any startup errors you might get from any of your software that might complain about not being able to get to the internet.On the computer, open a web browser and enter 192.168.0.100 in the address bar. A login window opens.Enter the access point user name and password.The default user name is admin. The default password is password. The user name and password arecase-sensitive. You can change these default values later as part of your setup, if you want.The Home page displays.Customize the access point settings for your network environment. My approach was to configure the WAC104 for "static IP" (not DHCP), exactly as I did with my previous WN604. I picked a known available and currently unused IP address of 192.168.1.124, with a subnet mask of 255.255.255.0, and a default gateway of 192.168.1.1, and a primary DNS server of 192.168.1.1. This means in normal operation your WAC104 will always have a static IP address of 192.168.1.124 from your router at 192.168.1.1. And that means you can always subsequently get back into the setup dialog of the WAC104 if you want to, by using a browser and addressing it via 192.168.1.124.I also set my desired new SSID network names for the 2.4 and 5 networks, along with the new passwords (i.e. "passphrase") for those WiFi network signins.I also set wireless security to "WPA2-PSK [AES]", for maximum wireless speed on both 2.4/5 bands. At first I checked "WPA-PSK [TKIP] + WPA2-PSK [AES]" but when I pushed APPLY I was warned about the full-speed limitation of this option, something I wasn't aware of. So I instead checked the "WPA2-PSK [AES]" option which is perfectly fine with me.If you want you can also change the WAC104 login username and password through the Administration -> Set password dialog.Push the APPLY button, to save all customized settings.After you complete the setup go back into Network and Sharing Center, etc., and change the PC/laptop TCPIPv4 properties back to original IP address or DHCP. Then shut down the computer and power-off the WAC104, and disconnect everything.Now you can reconnect the PC/laptop with ethernet cable back to your router, and reboot. Everything should be back to normal again.And you can connect the WAC104 through its own ethernet cable run to an open port on your router (or remote switch). Power-on the WAC104, and wait for the lights to stabilize. You should now be able to confirm that you see the two new 2.4/5 WiFi networks using your smart phone and a WiFi Analyzer app.You should also confirm from your PC/laptop that you can also get to 192.168.1.124 via a browser.Simple and straightforward. Just manually connect static-IP PC/laptop via ethernet cable directly to the WAC104 for setup.
      3: We have been on Starlink for about three months. Like other users, our smart garage door which uses the "myQ" app stopped working with Starlink's wireless connection. After a number of attempts to get it connected, an =internet search came across others having the same problem. The universal solution was to use a wireless access point. The NETGEAR WAC104 seemed like it was what we needed. It was!We have the current generation antenna (the rectangle one) and have the add-on Starlink Ethernet adapter for wired ethernet. Using an ethernet cable, I connected the output of the Starlink ethernet adapter into the NETGEAR WAC104. I then connected our HD TV screen into another port of the WAC104. So another question - Does the WAC104 work as a switch or hub YES! It will even work wirelessly, receiving the wireless signal from point A and relaying it wirelessly or by ethernet cable. Of course, wired is faster and more dependable that wireless.Read and follow the setup instructions carefully, and be sure to change the names and password for the 2.4GHz and 5GHz access point connections using the online setup (explained in the instructions). If you have not done that before, or are not "tech handy," the nomenclature and all the abbreviations can be tough to get through, but that is not just this AP (access point). There- you just learned your first one! ;-)

Product Image:
0
1
2
3
4

5 stars 59%

4 stars 1%

3 stars 20%

2 stars 33%

1 stars 0%

Bob
This is a beautiful stuff.
2021.03.06 12:00
Bob
This is a beautiful stuff.
2021.03.06 12:00
Bob
This is a beautiful stuff.
2021.03.06 12:00