film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure
film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure
film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure
film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure
film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure
film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure

film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure

Item code #:sku-EKEm9k
$USD 456.000$USD 474.000

590 in stock.

QTY:

What is film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure?


      Double Benefits: film xcxx Double film xcxx efficiency and film xcxx productivity to make working or relaxing that much more film xcxx comfortableWorks film xcxx great and has plenty film xcxx of motion for my office film xcxx and gaming setupIve bought one of the film xcxx retuned ones, for cheaper. film xcxx All parts were present.Overall its a decent film xcxx deal. film xcxx It hold 32 film xcxx inch 4K HDR film xcxx screen film xcxx just fine. film xcxx it is counterintuitive, but to film xcxx increase lifting film xcxx power the film xcxx power lift screw must be unscrewed, when it fully screwed in till the stop film xcxx - lift power film xcxx will be weakest. Yes lift film xcxx needs to be film xcxx adjusted to match film xcxx your actual film xcxx screen weight.Be careful film xcxx with vertical angle. Vertical angle better set once for the best one for you and do not change film xcxx afterwards, film xcxx more. Vertical angle hinge may get loose it twisted all the time and screen may film xcxx just start flipping down, but film xcxx its film xcxx common for all film xcxx budget film xcxx mounts, so do film xcxx not worry film xcxx too film xcxx much. I move film xcxx screen film xcxx all the other ways all the film xcxx time turn horizontally, make higher, lower, shift from one side of table to another, just dont film xcxx mess with vertical angle too much film xcxx and this thing will last.Its my second monitor hand and film xcxx previous film xcxx one seems a bit better in terms of film xcxx parts sturdiness, but Im sure that this film xcxx one will hold just fine.Package Includes: film xcxx 1 x film xcxx WALI Single film xcxx Monitor Gas film xcxx Spring film xcxx Stand, Mounting Hardware Kit, User Manual, film xcxx experienced and friendly US based customer support film xcxx available to assist 7 days a week.ExcellentSturdy Construction: High-grade material C-Clamp, film xcxx grommet base, film xcxx and VESA plate ensures a strong and stable connection with your film xcxx desk and monitor screenIt required a bit of work to put together film xcxx and set up, but nothing film xcxx more than could really film xcxx be expected. film xcxx I don't move my monitor too often film xcxx as I have other equipment around it in locations film xcxx I require. However, film xcxx it does lift the monitor off the desk perfectly and I film xcxx do film xcxx occasionally mess with film xcxx the tilt, which works just fine. It clamps down on film xcxx the desk, so if you film xcxx don't film xcxx have about film xcxx 3-4 inches film xcxx of open film xcxx desk for it film xcxx to film xcxx clamp/wrap around, film xcxx you may have issues with film xcxx it.I can't speak on film xcxx how it compares to film xcxx other mounts, but I've been happy with the purchase.Fully Adjustable: film xcxx The gas spring stand can tilt +35/-35, swivel +90/-90, and rotate film xcxx 360. Max height is up film xcxx to 23.62", and max extension is up to 18.34".I purchased this for an film xcxx iMac. film xcxx I did not realize film xcxx there are film xcxx two very specific film xcxx mounts for film xcxx iMacs film xcxx depending on the film xcxx year film xcxx model. Additionally, the iMac is film xcxx too film xcxx heavy for this mount.If I were mounting anything else, Id film xcxx probably really film xcxx be film xcxx happy with film xcxx the purchase. film xcxx Instead, I have had to fight with and film xcxx modify film xcxx and buy extra parts to film xcxx make this work with a film xcxx late model iMac.Initially, I had film xcxx an issue for rotated film xcxx angle of holder, film xcxx but after adding my film xcxx heaavy film xcxx monitor film xcxx it film xcxx was able to rotate easily. But after adding my heavvy monitor, head always goes down so I put a nut film xcxx with folded tissue inside the film xcxx gap of holder to film xcxx fix it. It would be better film xcxx to give film xcxx this info as FAQ in the manual so that film xcxx people film xcxx can solve out when they meet the situation.I saw similar film xcxx reviews from whom with similar issue like me. Hope to be helpful film xcxx for those people.Compatibility: Fits LCD, LED flat screen film xcxx TV and monitor up to film xcxx 32". Support film xcxx up to 17.6 film xcxx lbs. film xcxx VESA compatible film xcxx 75 x 75mm or 100 x 100 mm. The two-stage locking system is compatible with film xcxx 3.1 C-clamp and 1.6 film xcxx Grommet BaseThis is far from the ideal table film xcxx mount film xcxx for film xcxx ultrawide monitors, but it is film xcxx somewhat serviceable if film xcxx you can live with film xcxx some flaws. Please take some film xcxx time to look at the film xcxx screenshots I film xcxx posted for an film xcxx idea film xcxx of how you would want your setup film xcxx to look film xcxx like.1. With my monitor flushed back toward film xcxx the wall as I possibly can, there is still a 8.75 inch distance film xcxx from the wall to the monitor's film xcxx screen (not back of the monitor's housing).2. film xcxx I film xcxx have it so that film xcxx I cannot see film xcxx the "arm" film xcxx attached to the pole because it film xcxx would have been an eye film xcxx sore to see both film xcxx the film xcxx pole and articulation arm. That's the reason why film xcxx I have film xcxx it at 5.75 inch film xcxx from top film xcxx of the film xcxx desk to the bottom film xcxx of the monitor.3. The clamp method film xcxx is solid, granted you have support metal framework or a sturdy wood film xcxx framework film xcxx that will allow the clamp to station itself properly. I have it just tight enough film xcxx where film xcxx I film xcxx can't film xcxx twist film xcxx it any further without causing damage to my film xcxx desk. It seems sturdy. The weight film xcxx of my monitor is film xcxx 18.7 pounds and film xcxx it is film xcxx an ultrawide monitor found here: film xcxx https://www.amazon.com/dp/B06XFXX5JH/coliid=I18UWY3B4ZBTSR&colid=3NQEL5RPRFI67&psc=0&ref_=lv_ov_lig_dp_it4. The points of articulation are good, but they do film xcxx not film xcxx execute well. Tightening and loosening each articulation point requires a tool (provided), which feels archaic. film xcxx The gas spring is a film xcxx nice touch, but I film xcxx had to find the perfect sweet spot film xcxx where the arm and articulation point film xcxx held firmly after using the tool and winding it up several times to get it film xcxx right without it falling film xcxx and slamming my monitor against my film xcxx desk. This isn't necessarily the fault of the articulation film xcxx points, film xcxx but just the technology seems dated.5. Range of motion has good options because of film xcxx the multiple film xcxx articulation film xcxx points, but it feels film xcxx stiff. Changing each articulation feels rusty. I understand that it shouldn't feel film xcxx too "oiled up" because it won't film xcxx have that sturdy feel. It does feel film xcxx like a film xcxx trade-off.6. I went in expecting film xcxx to get a fully articulated mount for film xcxx different viewing purposes, but I think I film xcxx ended up with a film xcxx table mount that can film xcxx only stay in one film xcxx place or film xcxx else the composition of my desktop film xcxx setup looks imbalanced. film xcxx As film xcxx you will see film xcxx in the film xcxx images, the pole is mounted film xcxx off-center film xcxx so that I can have film xcxx my ultrawide monitor centered properly. Because of the arm and how it articulates, there is no other way around it. film xcxx You will understand this better if you do decide to film xcxx purchase this mount.7. For my film xcxx first film xcxx time installing film xcxx a monitor table mount, it was overall an easy-to-moderate experience. There film xcxx were steps in the installation that were frustrating, but I think film xcxx that film xcxx had to do more film xcxx with how I wanted my setup to film xcxx look like without compromise.8. Because of the 8.75 inch distance film xcxx from film xcxx wall to monitor screen, film xcxx the monitor feels to close for my viewing preference. The difference film xcxx between this table mount and the original monitor mount is, 8.75 inch from film xcxx wall and 6.75 inch from film xcxx wall (original mount). The film xcxx two inches makes a difference when it comes to desktop real estate.If you plan to having it film xcxx flushed against the wall, especially completely, this isn't the mount for you. If film xcxx you film xcxx want smooth and film xcxx seamless film xcxx articulation and range of motion, you may need film xcxx to film xcxx look elsewhere. film xcxx Perhaps the Amazon Basics mount or the Ergotron LX. They are both in the $100+ range film xcxx so I film xcxx understand those mounts may not be film xcxx ideal. But film xcxx I'm an idealist film xcxx when film xcxx it comes to my PC gaming and desk setup so I will most likely look at film xcxx a film xcxx few other options.9. VESA film xcxx mount was easy to install. Even my monitor supports VESA 100x100. Most monitors do, film xcxx so please check out film xcxx your monitor film xcxx and film xcxx remove its original stand to measure it for yourself. Do film xcxx not always trust the manufacturer's customer film xcxx service because LG told me film xcxx that film xcxx my monitor is NOT VESA mount film xcxx compatible. It's 70x70 film xcxx and 100x100 film xcxx VESA mount compatible.Final Verdict: film xcxx I may or film xcxx may not keep this mount. Perhaps, I need something simpler. film xcxx Maybe just a pole film xcxx and VESA adapter mount. I don't think I care so much film xcxx for the arm and film xcxx articulation because I found it film xcxx too much of a hassle to center my monitor. Not to film xcxx mention, not being film xcxx able to have film xcxx my film xcxx monitor more closer to the wall was probably the film xcxx deal-breaker for me. film xcxx A film xcxx couple of more inches back and I would have been film xcxx pretty satisfied.To film xcxx understand more film xcxx of what I tried to articulate, but done so poorly (haha), please check out the images below. The measurements I listed film xcxx above are film xcxx true. It may film xcxx not look like it in the images, but I measured it.I was not paid to film xcxx write this review. My opinion is my own. film xcxx I only hope to help others find good film xcxx products and film xcxx hopefully make their film xcxx lives a little better. I hope my film xcxx review film xcxx was helpful.Update: I ended up returning it because the gas spring was not working film xcxx properly film xcxx as it should. No film xcxx matter film xcxx how film xcxx much I set film xcxx it film xcxx to keep film xcxx the weight of my monitor up, it would film xcxx droop and film xcxx slam film xcxx my monitor to the desk. It was working just fine for almost two days and film xcxx then it film xcxx malfunctioned.As an alternative, I purchased film xcxx WALI's other mount film xcxx without the film xcxx arm. I am film xcxx able to flush my monitor further film xcxx back (almost film xcxx 3 film xcxx inches further back than than film xcxx this mount), and I'm very satisfied with it. If you are film xcxx interested in a film xcxx excellent desk film xcxx mount without the articulating arm, check this out: https://www.amazon.com/gp/product/B07MTS4H7P/ref=ppx_yo_dt_b_asin_title_o03_s00ie=UTF8&psc=1It's nice film xcxx not having a bulky film xcxx monitor stand anymore... I can film xcxx pull the film xcxx monitor up close film xcxx and tilt it to a comfortable position even film xcxx when I stand.


      WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Display 17-32 inch, 17.6lbs Weight Capacity GSDM001Compatibility: Fits LCD, film xcxx LED flat screen TV and film xcxx monitor up to 32". film xcxx Support up to 17.6 lbs. VESA compatible 75 x film xcxx 75mm or 100 x 100 mm. film xcxx The two-stage film xcxx locking film xcxx system is compatible with 3.1 C-clamp and 1.6 film xcxx Grommet BaseFully Adjustable: The gas spring film xcxx stand can tilt +35/-35, swivel +90/-90, and film xcxx rotate 360. film xcxx Max height is up to 23.62", and max extension is up to 18.34".Double Benefits: Double film xcxx efficiency film xcxx and film xcxx productivity to make working or relaxing film xcxx that much more comfortableSturdy Construction: film xcxx High-grade film xcxx material film xcxx C-Clamp, grommet film xcxx base, and VESA plate film xcxx ensures a strong and film xcxx stable connection with your desk and monitor film xcxx screenPackage Includes: 1 x film xcxx WALI Single Monitor Gas Spring Stand, Mounting Hardware Kit, User Manual, film xcxx experienced and friendly film xcxx US based customer support available to film xcxx assist 7 days a film xcxx week.



How to use WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs ?

      film xcxx WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Screen GSDM001 weighs 17.6lbs Wear to show off your figure



Buyer's experience:


      1: This is far from the ideal table mount for ultrawide monitors, but it is somewhat serviceable if you can live with some flaws. Please take some time to look at the screenshots I posted for an idea of how you would want your setup to look like.1. With my monitor flushed back toward the wall as I possibly can, there is still a 8.75 inch distance from the wall to the monitor's screen (not back of the monitor's housing).2. I have it so that I cannot see the "arm" attached to the pole because it would have been an eye sore to see both the pole and articulation arm. That's the reason why I have it at 5.75 inch from top of the desk to the bottom of the monitor.3. The clamp method is solid, granted you have support metal framework or a sturdy wood framework that will allow the clamp to station itself properly. I have it just tight enough where I can't twist it any further without causing damage to my desk. It seems sturdy. The weight of my monitor is 18.7 pounds and it is an ultrawide monitor found here: https://www.amazon.com/dp/B06XFXX5JH/coliid=I18UWY3B4ZBTSR&colid=3NQEL5RPRFI67&psc=0&ref_=lv_ov_lig_dp_it4. The points of articulation are good, but they do not execute well. Tightening and loosening each articulation point requires a tool (provided), which feels archaic. The gas spring is a nice touch, but I had to find the perfect sweet spot where the arm and articulation point held firmly after using the tool and winding it up several times to get it right without it falling and slamming my monitor against my desk. This isn't necessarily the fault of the articulation points, but just the technology seems dated.5. Range of motion has good options because of the multiple articulation points, but it feels stiff. Changing each articulation feels rusty. I understand that it shouldn't feel too "oiled up" because it won't have that sturdy feel. It does feel like a trade-off.6. I went in expecting to get a fully articulated mount for different viewing purposes, but I think I ended up with a table mount that can only stay in one place or else the composition of my desktop setup looks imbalanced. As you will see in the images, the pole is mounted off-center so that I can have my ultrawide monitor centered properly. Because of the arm and how it articulates, there is no other way around it. You will understand this better if you do decide to purchase this mount.7. For my first time installing a monitor table mount, it was overall an easy-to-moderate experience. There were steps in the installation that were frustrating, but I think that had to do more with how I wanted my setup to look like without compromise.8. Because of the 8.75 inch distance from wall to monitor screen, the monitor feels to close for my viewing preference. The difference between this table mount and the original monitor mount is, 8.75 inch from wall and 6.75 inch from wall (original mount). The two inches makes a difference when it comes to desktop real estate.If you plan to having it flushed against the wall, especially completely, this isn't the mount for you. If you want smooth and seamless articulation and range of motion, you may need to look elsewhere. Perhaps the Amazon Basics mount or the Ergotron LX. They are both in the $100+ range so I understand those mounts may not be ideal. But I'm an idealist when it comes to my PC gaming and desk setup so I will most likely look at a few other options.9. VESA mount was easy to install. Even my monitor supports VESA 100x100. Most monitors do, so please check out your monitor and remove its original stand to measure it for yourself. Do not always trust the manufacturer's customer service because LG told me that my monitor is NOT VESA mount compatible. It's 70x70 and 100x100 VESA mount compatible.Final Verdict: I may or may not keep this mount. Perhaps, I need something simpler. Maybe just a pole and VESA adapter mount. I don't think I care so much for the arm and articulation because I found it too much of a hassle to center my monitor. Not to mention, not being able to have my monitor more closer to the wall was probably the deal-breaker for me. A couple of more inches back and I would have been pretty satisfied.To understand more of what I tried to articulate, but done so poorly (haha), please check out the images below. The measurements I listed above are true. It may not look like it in the images, but I measured it.I was not paid to write this review. My opinion is my own. I only hope to help others find good products and hopefully make their lives a little better. I hope my review was helpful.Update: I ended up returning it because the gas spring was not working properly as it should. No matter how much I set it to keep the weight of my monitor up, it would droop and slam my monitor to the desk. It was working just fine for almost two days and then it malfunctioned.As an alternative, I purchased WALI's other mount without the arm. I am able to flush my monitor further back (almost 3 inches further back than than this mount), and I'm very satisfied with it. If you are interested in a excellent desk mount without the articulating arm, check this out: https://www.amazon.com/gp/product/B07MTS4H7P/ref=ppx_yo_dt_b_asin_title_o03_s00ie=UTF8&psc=1


      2: It's nice not having a bulky monitor stand anymore... I can pull the monitor up close and tilt it to a comfortable position even when I stand.


      3: Ive bought one of the retuned ones, for cheaper. All parts were present.Overall its a decent deal. It hold 32 inch 4K HDR screen just fine. it is counterintuitive, but to increase lifting power the power lift screw must be unscrewed, when it fully screwed in till the stop - lift power will be weakest. Yes lift needs to be adjusted to match your actual screen weight.Be careful with vertical angle. Vertical angle better set once for the best one for you and do not change afterwards, more. Vertical angle hinge may get loose it twisted all the time and screen may just start flipping down, but its common for all budget mounts, so do not worry too much. I move screen all the other ways all the time turn horizontally, make higher, lower, shift from one side of table to another, just dont mess with vertical angle too much and this thing will last.Its my second monitor hand and previous one seems a bit better in terms of parts sturdiness, but Im sure that this one will hold just fine.


      4: Works great and has plenty of motion for my office and gaming setup


      5: Excellent


      6: I purchased this for an iMac. I did not realize there are two very specific mounts for iMacs depending on the year model. Additionally, the iMac is too heavy for this mount.If I were mounting anything else, Id probably really be happy with the purchase. Instead, I have had to fight with and modify and buy extra parts to make this work with a late model iMac.


      7: It required a bit of work to put together and set up, but nothing more than could really be expected. I don't move my monitor too often as I have other equipment around it in locations I require. However, it does lift the monitor off the desk perfectly and I do occasionally mess with the tilt, which works just fine. It clamps down on the desk, so if you don't have about 3-4 inches of open desk for it to clamp/wrap around, you may have issues with it.I can't speak on how it compares to other mounts, but I've been happy with the purchase.


      8: Initially, I had an issue for rotated angle of holder, but after adding my heaavy monitor it was able to rotate easily. But after adding my heavvy monitor, head always goes down so I put a nut with folded tissue inside the gap of holder to fix it. It would be better to give this info as FAQ in the manual so that people can solve out when they meet the situation.I saw similar reviews from whom with similar issue like me. Hope to be helpful for those people.



Product Image:
0
1
2
3
4
5

5 stars 59%

4 stars 1%

3 stars 20%

2 stars 33%

1 stars 0%

Bob
This is a beautiful stuff.
2021.03.06 12:00
Bob
This is a beautiful stuff.
2021.03.06 12:00
Bob
This is a beautiful stuff.
2021.03.06 12:00